The universal cultivator can be used for various uses.
The main focus of use is the flat soil cultivation with a good loosening effect and mixing up of the soil structure.
Terrakan
- The Terrakan-models are available as a three-point-linkage machine with a working width in 3 / 4,5 / 5 and 6 meters.
- The serially mounted Spring-tine (70x12) is mounted on 4 beams with a spacing in strokes of 15 cm.
- The Spring-tines are mounted with changing-shares and can
optionally be equipped with broad shares.
Working depth from 4 cm to 15 cm
- for a flat stubble cultivation with optimal distribution of straw
- for the seeding bed preparation as fine cultivator for
mechanical combat of weeds
The primary use of the Terrakan
- loosening and ventilating of the soils in spring
- working in of liquid manure and fertilizers
- second stubble cultivation for mulch seed
- seed bed preparation after ploughing
As of 4,50 m working width the Terrakan models are set up in two flap pieces via a central hydr. cylinder for the transport on the road.
In open position the flap pieces are interlocked with a hydr. cylinder via a control block and additionally mechanically; then the transport width is approx. 2,5 m.
Stable tube frame construction in 4 beams with a long three-point-support in the back ensures high quality and a long life time.
Stable hitch with cat. II (825 mm) bolts ø28 mm or ø36 mm or optionally double hitch with cat. II and cat. III (825 and 965 mm)
Rubber support wheels 18x8,5-8 (460 mm) can be mounted optionally for an even better evenly depth guidance.
These are recommended for working
widths as of 5 m.
The support wheels are easily adjustable in depth.
The levelling bar is recommended for the smoothing of the soil bank (after ploughing).
The levelling bar is mounted via the whole working width.
Adjustment in depth via spindle.
For a save transport at street we recommend a warning sign with lamp.
The warning sign with lamp remains always in the same position and doesn’t have to be removed.
The working depth can be easily adjusted via two perforated strips of the after running tool.
The straw weeder with 10 mm double tines enables a good final smoothing of the soil surface.
At straw residues you obtain a renewed mixing and at seed bed preparation you obtain a good mixing of the soil structure.
The straw weeder can be adjusted in depth and in the angle.
Spring loaded double flattening tines are mounted for smoothing after the tines section.
Border put in tines can be mounted additionally (mec. foldable)
Levelling bar
Hydraulically adjustable and multifunctional levelling bar
Shears frozen harvest residues and puts them in working direction
Tines
- The Spring-tines 70x12 mm are serially mounted with changing shares on 4 beams with a spacing in strokes of approx. 15 cm.
- Duck-foot-shares can be mounted optionally instead of the changing shares for a complete mixing up.
- duck-foot-share B 200 x 6 mm
- The broad share V 200 x 7 mm is a strong version of the duck-foot share with a considerably longer life time.
- The complete mixing up of the soil structure is especially used by bio farmers for the combat of weeds.
Single roller crumbler - tube flat beam roller tiller „combi-mix“
- very good mixing effect by the combination of tube and flat beam (ø 400 mm)
- also available as tube roller tiller for stony soils
Double roller tiller
- Very good mixing effect can be achieved by a combi-roller and
reconsolidation of the soil by a cage roller. - Different diameter of both rollers (in the front ø 450 mm and in the back ø 410 mm)
- counter-rotating direction of the bar of the front and back roller
- Exact depth guide and solidification through double supporting surface and pendulum mounting
- Very good mixing effect can be achieved by a combi-roller and
Ring roller ø600mm with wipe baulk and cleaning bar
- very good resolidification – optimal soil for self-sown grain and weed
- good crumbling and cleaning of the roller tillers by wipe knifes between the rings
- Well - suited for mulch seed (no blockages)
- wipe baulk in the back
